Coin Focal Inspiration
The last time you looked through your jewelry box, or boxes like me, there were probably many pieces shoved to the side and no longer worn for one reason or another. Why not think about restyling them to have a more current look.
This inspiration was used to create the jewelry-making pattern: Coin Focal
This inspiration was used to create the jewelry-making pattern: Coin Focal
Instructions
Some of my beaded jewelry needed a refresh because I realized I wasn't wearing it.
One example was a bracelet I had made to match a three-strand necklace that I love.
Wearing both together felt too matchy-matchy.
On top of that, the bracelet's slide clasp was too loose.
One example was a bracelet I had made to match a three-strand necklace that I love.
Wearing both together felt too matchy-matchy.
On top of that, the bracelet's slide clasp was too loose.
The strands were separated and restrung using 49-strand beading wire instead of 19-strand for better flexibility and strength.
They sat on the bead board for several days while I struggled to come up with a design idea for a focal closure.
I realized I also rarely wore my coral necklace and bracelet set for the same reason I didn't wear the multi-colored gemstone bracelet.
Maybe adding more coral would be the solution.
Off to my box of red coral I went.
They sat on the bead board for several days while I struggled to come up with a design idea for a focal closure.
I realized I also rarely wore my coral necklace and bracelet set for the same reason I didn't wear the multi-colored gemstone bracelet.
Maybe adding more coral would be the solution.
Off to my box of red coral I went.
A friend gave me the coral coin focal less than six months ago.
How could I have put it away with my coral beads and completely forgotten such a unique piece?
I'm going to blame it on old age not the fact that I have way too many beads and can't remember a tenth of what's in there!
How could I have put it away with my coral beads and completely forgotten such a unique piece?
I'm going to blame it on old age not the fact that I have way too many beads and can't remember a tenth of what's in there!
The obvious solution for attaching the coral coin to the bracelet was to use a beaded loop through the center hole.
But bezel setting the coin took it up a notch.
It enhanced the focal point and tied in beautifully with the silver elements on both ends of the bracelet.
But bezel setting the coin took it up a notch.
It enhanced the focal point and tied in beautifully with the silver elements on both ends of the bracelet.
I only remembered the Japanese 50-yen coins in my stash after finishing the bracelet.
I quickly turned one into a focal and made a similar bracelet with it BONUS!
Both bracelets look fantastic with the multi-gemstone and coral necklaces, as well as many pieces of my Southwest jewelry.
I quickly turned one into a focal and made a similar bracelet with it BONUS!
Both bracelets look fantastic with the multi-gemstone and coral necklaces, as well as many pieces of my Southwest jewelry.
Materials
Variety of Beading wire to choose from
Wide variety of beads to choose from
Tools
20 X 15 Inch Padded Work Mat
MAT-620.00
- MAT-620.00
- Lesson Quantity: 1.00 pieces
- Purchase Quantity: 1.00 each
- Price: $14.95
- Gold Club Price: $11.21
WireJewelry - Ultimate Wire-Pliers Jewelry Pliers with Case, Set of 5
G15-20
- G15-20
- Lesson Quantity: 1.00 pieces
- Purchase Quantity: 1.00 each
- Price: $170.72
- Gold Club Price: $128.04
Optional Tools
Deluxe Soldering Kit
G15-5
- Lesson Quantity: 1.00 pieces
- Purchase Quantity: 1.00 each
- Price: $116.97
- Gold Club Price: $87.73
Supply Detail
loading...
Change Metal:
This Tip requires:
Purchase quantity:
Price: $
Gold Club Price: $
Purchase quantity:
Price: $
Gold Club Price: $
- Category: Design
- Technique(s): Design
Judy Larson
Other Tips by Judy Larson
Cleaning Your Jewelry
Build A Tool Rack
Clamps for Jewelry Making
Finishing Wire Ends
Handmade Closures
Removing Tarnish From Your Jewelry
Homemade Pickle
Wire Wrapped Loops
How to Make Balled Head Pins
Lessen the Noise - Save Your Eardrums
Make a Rivet and Eyelet Tile
Two Tips for Making Pendant Bails with Craft Wire
Petal Forming on a Wood Block
Save Your Fingers while Texturing
Soldering on Copper
Sticker Templates
Using 6 Step Barrel Pliers
Using a Center Finder
Using a Tile to Cut Rivets
Using Household Super Glue on Minor Cuts, Nicks and Scrapes
Using Tiles on Tube Rivets and Eyelets
Clothespin Tools
Making Decorative Granulation Beads
Using Your Hole Punch Pliers
Decorative Granulation and Beads
How to Find and Mark the Center of a Disc.
Choosing the Right Clasp
Chunky Chain Inspiration
Tool Tip - Steampunk or Industrial Rivets
Storing Jump Rings
Wear Your Brooches on a Neckwire
Storing Your Metal
Using Disc Cutter Shims
Conditioning a Rawhide Mallet
Flattening Metal Pieces
Quenching
Saving a Broken Solder Brick
Why I Use Solder Paste
Designing a Toggle Clasp That Works
Round Mandrels
Get the Look of Eyelets
Earring Pairs Template
Storing and Caring for Files
Open or Closed Jump RIngs on Bracelets and Necklaces
Versatile Permanent Markers
You Used What
Rescuing a Very Used Magnesia Soldering Block
Using Hole Punch Pliers
Metal Shears Care
Paperclip Earrings
Think Outside the Box - Alternative Metal Texturing
Make Stamping Metal a Bit Easier
Stone Bezel Setting Tips
Viking Knit Tips
Using Glue Under Cabochons
Tool Tip - Digital Pocket Scale
Repeat Performance
Another Way to Condition a Rawhide Mallet
Carry a Sketch Pad
Why You Should Take a Class
Jewelry Making Templates
Carry a Sketch Pad
Keeping Your Bracelet Focals in Place
Metal Content Stamping
Using Sanding Sponges and Papers
Adding Depth to Carved Beads and Cabochons
Closing Rings Tightly for Soldering
Squaring Wire Ends
Ring Mandrels
Tool Tip - Bench Brushes
Scrap Wire Twisted Rings
Tool Tip - Soft Bristle Metal Brushes
Project Multiples - Calibrated Cabochons
Mobius Pearl Drop Earrings
Copper Wire Solder
Large Dapping Punches and Alternatives
Project Multiples - Glass Pebble Cabs
Project Storage
Tiny Bead and Findings Storage
Working Smart
Display Trays as Storage
Making TIny Leaves
Adapting a Tutorial
Build Better Bead Storage
Using Magical Crimping Pliers
Add a Touch of Gold
Make a Lacy Argentium Scrap Metal Sheet
Birch Bark Texture
Versatile Snap-on Bails
Bead Cap Primer
Using Glue Sticks with Printed Templates
Choosing a Lake or Riverstone
Do a Facebook Collaboration
Shielding a Jewelry Piece When Stone Setting
Some Ideas Are Right in Front of You
Curving and Scrolling Wire
Using Snapsets to Add Sparkle to Your Work
Cutting Wire Multiples of the Same Length
Separating Distinct Textures on a Single Piece of Metal
Changing the Size of a Pearl
Easy Ring Cleaning
Add a Bit of Dimension
Keeping Projects Separate
Tumbling and Polishing Metal Beads
Unexpected Jewels
Saws and Turning Radius
Flattening Metal Pieces
Mobius Ring Spacers
Filing Angled Wires in a Jig
Storing Handmade Elements
Simple Way to Straighten Wire
Two Ways to Make Simple Loops
Making Simple Eyepins
Using Fun Tak as a Resist
Why Use a Binder to Store Embellishments
Storing Dapping Blocks and Punches
Wire Basics - Opening and Closing Jump Rings
Enlarging a Bezel
Leaf Inspirations
Earring Findings for Different Ages
Accidentally Learning Something New
Fusing Jump Rings
Tool Tip - Divided Caliper Scribe
Out of the Mouths of Babes or Fixing a Spinning Bracelet
Rethinking a Design
When Bead Holes are Too Large
Soldering a Dome to a Backplate
Eye of Shiva AKA Pacific Cat's Eye
Ribbon Wrapped Bracelet tips
Making Lightweight Earrings with Unexpected Finds
Tool Tip - Indispensable Tapes
What Happens To Pearls Not Worn, Cleaned, and Stored Properly
Aha Lightbulb Moment
Adding Loops for Dangles on a Classic Wire Bezel Wrap
After the Rain - Found Treasures
Back to School
Bezel Solution for Corners and Points
Filling Holes in Stones
Dots to the Rescue
Raising Stones in Bezel Settings
Leveling the Bottom of a Large Bezel
Using Leftovers
Make-do Sawing Solutions
Combining Tutorials
Scrap Melt
What's Your Jewelry Style
Using Wax from Braces
Sometimes Simple Really is Better
Bead Soup and Small Changes
Repurposing Sterling Cord End Findings
Wire Wrapped Bail Finishing Options
Protecting The Back of a Piece When Setting Stones
Altering Your Dapping Block
Trimming Around a Bezel
Making Tiny Dapped Metal Leaves
Labeling Cabs When Working with Them
Basic Round Well Wood Dapping Blocks
Get Inspired by What's on Your Bench
When Things Go Awry
Putting On and Taking Off a Cuff Bracelet
Adding Hearts to Your Designs
Taking Care of Your Rolling Mill
Power Up
Hammer Basics
Wire Temper and Jump Rings
Embellish Bezels with Twisted Wire
Embellish a Treasure Box
Make a Polymer Clay Cabochon Mandrel
Jewelry Packaging for Small Items - Pillow Boxes
Make-do Sawing Solutions
Ball Chain Embellishments
Pickling and Super Pickle
A Better T-bar
A Better Way to Change a Saw Blade
Making Consistent Hanging Loops
Targeted Patina
Bracelet and Paperclip Trick
What Wire is Best for Earring Findings
Storing Your Metal Stamps
Save Those Old Buttons
Adjusting Purchased Ear Wires
Twisted Wire Tips
Stash Inspiration and Notes
Short Quotes for Stamped Jewelry
My Favorite Tweezers
No Rolling Mill- No Problem
Coiling Wire for Jump Rings
Cutting Coils Into Jump Rings
Closed Jump Rings Soldering vs Fusing
The premier place for all your jewelry making needs. The best in wire, tools, cabochons, gemstone beads and more. As well as a superior resource for educational support to help build your jewelry making skills and techniques.
Connect With Us
® 2007 - 2025 Wirejewelry.com Powered by ClaimTheWeb Cart