Inspired by my photograph: Sunset at the Cabin, I grabbed some pearl chips from my stash that were the perfect match.
I also wanted to add texture and accentuate this contrast by using sparkly crystals and pearls with the textured copper "bones." You can wear this project as a necklace or wrap bracelet!
View the color inspiration behind this jewelry-making pattern: Sunset at the Cabin
Materials
14 Gauge Round Dead Soft Copper Wire
H11-14D
Lesson Quantity: 5.00 inches
Purchase Quantity: 1.00 1FT
Price: $1.83
Gold Club Price: $1.37
Add to Bag
WireJewelry Ultra Pro Micro Abrasive Polishing Pads, 20 pack
6.5-7mm Large Hole (1.2mm) White Potato Fresh Water Pearls - Pack of 20
A8-04
Lesson Quantity: 10.00 pieces
Purchase Quantity: 1.00 each
Price: $20.57
Gold Club Price: $15.43
Add to Bag
Gold Filled Jump Rings Open (.025) 22ga. (OD) 4mm (ID) 2.55mm - Pack of 25
J11-189
Lesson Quantity: 20.00 pieces
Purchase Quantity: 1.00 each
Price: $8.02
Gold Club Price: $6.02
Add to Bag
Rose Gold Filled Magnetic Clasp 4.5mm Button Shape - Pack of 1
L3-13
Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 each
Price: $5.38
Gold Club Price: $4.04
Add to Bag
pearl chip beads
Lesson Quantity: 12.00 pieces
Purchase Quantity: 1.00 each
8/0 seed beads
Lesson Quantity: 20.00 pieces
Purchase Quantity: 1.00 each
Add All Items to Cart
Tools
WireJewelry - Ultimate Wire-Pliers Jewelry Pliers with Case, Set of 5
G15-20
G15-20
Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 each
Price: $170.72
Gold Club Price: $128.04
Add to Bag
20 X 15 Inch Padded Work Mat
MAT-620.00
MAT-620.00
Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 each
Price: $14.95
Gold Club Price: $11.21
Add to Bag
Steel Block--Deluxe Hardened Steel
DAP-525.50
DAP-525.50
Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 each
Price: $18.97
Gold Club Price: $14.23
Out of Stock
4x4 Inch Rubber Block
G17-12
G17-12
Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 each
Price: $8.95
Gold Club Price: $6.71
Add to Bag
Wubbers Artisan's Mark 4 Pc Texture Hammer Set
HAM-6100
HAM-6100
Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 each
Price: $99.95
Gold Club Price: $74.96
Add to Bag
Euro Punch Plier 1.50mm
PLR-133.70
PLR-133.70
Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 each
Price: $14.97
Gold Club Price: $11.23
Add to Bag
Flat Nose Nylon Flat Jaw With Spring
PLR-831.00
PLR-831.00
Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 each
Price: $13.80
Gold Club Price: $10.35
Add to Bag
Economy Needle File Set, 6 Piece Set
FIL-993.00
FIL-993.00
Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 each
Price: $7.95
Gold Club Price: $5.96
Add to Bag
Liver of Sulphur Gel, 2 Ounce Bottle
SOL-610.02
SOL-610.02
Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 each
Price: $12.95
Gold Club Price: $9.71
Add to Bag
CLEAR SAFETY GLASSES
GLS-120.40
GLS-120.40
Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 each
Price: $4.95
Gold Club Price: $3.71
Add to Bag
Add All Items to Cart
Instructions
Step 1
Cut five 1" pieces of 14 g copper wire and hammer one end using the chasing hammer to thin out the metal at the end so it flairs out like a paddle.
Step 2
I like to add a twist to the wire - after hammering one end of the wire, rotate the wire 90 degrees and hammer the other wire end.
*Optional step - use a texture hammer once you've achieved the desired shape being careful not to change it too much by over-hammering.
Step 3
Using a Sharpie, mark where you want the holes to go and punch a hole in each paddle.
File any rough edges especially around the holes.
*Optional step - apply patina to the bones or use my "Cheater Patina" method to accentuate the texture.
Step 4:
Create the crystal links
Cut a 4" piece of 24 g wire (use the nylon jaw pliers to straighten your wire if needed) and create a messy wrapped loop at one end.
String onto the wire: 3 pearl chips, a round crystal, 3 pearl chips and make another messy wrapped loop at the other end. Make 4 links.
Step 5:
Create the pearl links
Cut a 3" piece of 24 g wire and create a messy wrapped loop at one end.
String the following onto the wire: seed bead, pearl, seed bead and make another messy wrapped loop at the other end. Make 10 links.
Step 6:
Connect the links in the following order using jump rings:
Pearl link, Bone, Pearl link, Crystal link, Pearl link, Bone, Pearl link, Crystal link, Pearl link, Bone, Pearl link, Crystal link, Pearl link, Bone, Pearl link, Crystal link, Pearl link, Bone, Pearl link.
Step 7
Attach the magnetic clasp with jump rings.
Supply Detail
loading...
Change Metal:
This Pattern requires:
Purchase quantity:
Price: $
Gold Club Price: $
Internationally award winning designer, teacher and official Swarovski Instructor, she resides with her 2 puppies, Sparkle and Bling in beautiful Colorado. Kristal's fashion endeavors include designing & creating jewelry for the Jimmy Buffet Band backup singers & dancers; appearing numerous times on HGTV, PBS and JTV and teaching on cruise ships worldwide.
The author of 4 books: Metal Clay 101 for Beaders, Foxy Epoxy, Fabulous Fabric Beads Sassy Silky Savvy; 2 DVDs: Mixed Media: Beaded Bracelets with Fiber Beads and Crystals, Resin, Wire Mixed Media: Jewelry Making with Handmade Beads, Crystals, Resin, and More! Past editor of BeadingDaily.com, her designs have been featured in over 85 publications. Kristal's jewelry has been represented in galleries spanning the globe including Santa Fe - Canyon Rd. Alaska, Cayman Islands, Italy, Germany & the Virgin Islands.