Interchangeable Pendant Frame

by Sherrie Lingerfelt

Category: Classic
Technique(s): Wrapping
Skill Level: Intermediate

This may sound incredible, but I actually woke up from a dream about this design and immediately made a sketch. The resulting pendant turned out to be very versatile. I used a large, reconstituted turquoise bead to show you how to use it, but as the creator you can make a variety of individual bead charms or small pendants to interchange on this frame. (And "Cougar" is always saying, "Versatility equals affordability!")

Technique: Precise Bending & Forming Heavy Square Wire

Materials

18 Gauge Square Half Hard .925 Sterling Silver Wire

H8-18SQH

Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 1FT
Price: $5.51
Gold Club Price: $4.13

Add to Bag

18 Gauge Half Round Half Hard .925 Sterling Silver Wire

H8-18HRH

Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 1FT
Price: $2.21
Gold Club Price: $1.65

Add to Bag

Bead of your choice and size

Shop Now

African Turquoise 10x14mm Oval Beads - 8 Inch Strand

A1-739

Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 each
Price: $12.60
Gold Club Price: $9.45

Add to Bag

Add All Items to Cart

Tools

6.5 Inch Long Flat Nose Pliers - Pack of 1

G2-74

G2-74
Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 each
Price: $9.87
Gold Club Price: $7.40

Add to Bag

4-1/2 Inch Chain Nosed Pliers with Ergonomic Handles

G2-68

G2-68
Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 each
Price: $8.97
Gold Club Price: $6.73

Add to Bag

Scotch 0.94 Inch Painters Tape for Taping Wires Together

G13-5

G13-5
Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 each
Price: $5.97
Gold Club Price: $4.48

Add to Bag

12 Inch Stainless Steel Ruler

G7-30

G7-30
Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 each
Price: $2.97
Gold Club Price: $2.23

Add to Bag

C.H.P Milano Angled Flush Cutter, 5-1/4 Inches

PLR-489.00

PLR-489.00
Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 each
Price: $21.95
Gold Club Price: $16.46

Add to Bag

4.5 Inch Round Nose Pliers

G2-12

G2-12
Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 each
Price: $3.97
Gold Club Price: $2.98

Add to Bag

Add All Items to Cart

Instructions

Step 1

Using 16g wire, straighten, measure and then cut one piece 10-1/2 inches long and one piece 1-1/2 inches long. On the 10-1/2 inch wire, make each of the following marks in consecutive order, measuring from each previous mark.

Make first mark 3/4 inches from one end.
2nd mark: 3/4 inches up and away from first mark.
3rd mark: 2 inches
4th mark: 3/4 inches
5th mark: 1 inch
6th mark:a second 1-inch mark
7th mark: 3/4 inches
8th mark: 2 inches
9th mark: 3/4 inches

Step 2

Use flat nose pliers to hold at first 3/4 inch mark and make a sharp 90° angle down. Then hold the wire at 2nd 3/4 inch mark and make a sharp 90° angle down. Next, hold the wire at 2 -inch mark and make a sharp 90° angle up. Finally, hold the wire at 3/4 inch mark inch and make a sharp 90° angle down.

Sherrie Lingerfelt's Interchangeable Pendant Frame - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry,

Step 3

Using round nose pliers hold the wire at 1-inch mark and roll wire down 180°. This will form the bail.

Step 4

Next, hold the wire at 2nd 1-inch mark after the bail roll, and use pliers to make a sharp 90° angle out. Then hold the wire at 3/4-inch mark inch and make a sharp 90° angle down, and then hold the wire at 2 inch mark inch and make a sharp 90° angle in, forming an open square. Finally hold the wire at 3/4inch mark inch and make a sharp 90° angle down.

Step 5

On the 1-1/2 inch 16g wire, measure and mark 3/8 inch down from one end. At the very tip of this wire, use chain nose pliers to slightly bend the tip out. Holding the wire at the 3/8-inch mark with round nose pliers, bend both ends up to form a hook. Hold the hook in the pliers at 1/4 inch from curve of hook, and slightly bend the long end of the hook backward. Close hook slightly.

Step 6

Measure and mark 3/8 inch from top of hook. Place the hook between bail wires, lining up the 3/8 mark with the bottom end of the bail wires and tape in place. Use the 3 3/4 inch 18-gauge, half round wire to make 4 wraps to show, at base of bail, wrapping the hook into the bail.

Step 7

Use chain nose pliers to bend the top of the hook toward the back, and crimp down over the wraps. Use round nose to hold top of bail and roll backward to complete the form.

Step 8

Line up the bottom wires of the pendant and tape together. Use the remaining 18 gauge, half round wire to make 3 wraps to show, closing the frame.

Step 9

Use flat nose to hold these newly made wraps, while slightly separating the wire ends. Then use chain nose to roll each wire out and up, to form rosettes.

Step 10

Place your favorite bead on a wire; the gauge depends on size of bead. I used a 20 gauge round for this large, oval bead. Make a rosette on one end, drop the bead on the wire, and make a closed loop on the top to hang your treasure!

Reviews

Sherrie Lingerfelt

Sherrie Lingerfelt is a native of the Deep South and a full-time, high school math teacher who has always had her hands in one craft or another. Her interest in jewelry making began more than twenty years ago, by mixing macrame with fossils and stones, which progressed into beading. After discovering the WireJewelry website many years ago, Sherrie's fascination with wire led her to meet and take classes with Dale 'Cougar' Armstrong and her life changed forever.

Sherrie is now a wire jewelry artist who combines her Native American heritage with her love of geometry and nature, to create fabulous wire jewelry designs that have taken many awards. Her inspiration comes from various sources, and she is often seen pulling out an ever-present, mini-notebook to sketch lines from architecture as future 'design fodder'. Sherrie and her husband Larry live on their farm in Fyffe, Alabama.