Using the tip of the round-nose pliers, make a loop with the left wire that has an internal dimension of 2mm, just as was done in the Infinity link. The loop is made by wrapping the wire around the pliers and bringing the wire behind the loop and towards the right wire.
Now you will create the second loop the same manner as the first loop but bring the wire end towards the first loop.
Wrap the right wire around the base of the left loop one time, bringing the wire end away from both loops. Wrap the left wire around the base of the right loop one time, bringing that wire end away from both loops.
Bring the wires down and along the side of the rose link and make the same two loops on the opposite side and cut the remaining wire.
Adjust the loops outward or inward with your pliers, so that the loops of the rose links are the same distance as the infinity link loops.